Please provide the following information if the cylinder is already in use.
Brands used
Specifications/models used
Conditions for use
1. Inner diameter() mm of the cylinder portion
2. inner diameter() mm of the cylinder portion of the booster cylinder
3. Cylinder total stroke() mm(must be provided)
4. Supercharged cylinder power stroke() mm(must be provided)
5. Pressure output pressure() T(must be provided)
6. Use air source pressure() kg/cm
7. The weight of the mold loaded by the cylinder(kg)
8. Frequency of use: Number of jobs per minute()
9. Booster cylinder fixation
Before deciding on the selection, you need to understand the following conditions in advance:
1. Total itinerary required() mm
2. The required force stroke is also known as the high pressure stroke() mm
3. Required work effort() kg
4. The number of jobs required per minute or every other minute
5. Cask or supercharged cylinder fixation
6. The source of air pressure(kg / cm) that can be provided
7. Operating temperature()
8. The required lift force, that is, the weight of the mold, how much force can pull the mold back(kg)
If you want to replace the cylinder with a booster cylinder, please provide the following information:
1. Cylinder inner diameter() mm
2. Cylinder stroke() mm
3. Use pressure(kg / cm)
4. Frequency of use: Number of times per minute()
5. Operating temperature()
6. Weight(kg) of mold connected to the cylinder
7. The required output stroke is the depth at which the workpiece is squeezed() mm
Please provide the following information if you want to replace the pressure cylinder with the pressure cylinder at present:
1. Inner diameter() mm of cylinder
2. The stroke of the cylinder() mm
3. Pressure(kg / cm) for pressure system
4. Frequency of use: Number of times per minute()
5. Operating temperature()
6. Weight(kg) of the mold connected to the cylinder
7. The required output stroke is the depth at which the workpiece is squeezed() mm
8. The fixed way of the cylinder
If you want to replace the Supercharger cylinder with the Supercharger cylinder, please provide the following information.
Previous brand use
Specifications/models previously used
Conditions for use
1. Oil cylinder inner diameter() mm
2. Cylinder stroke() mm
3. Internal diameter() mm of the Supercharger
4. Supercharge ratio() times
5. Spit out of Supercharger() CC
6. Use pressure(kg / cm)
7. Supercharger output pressure() kg/cm
8. The weight of the mold loaded by the cylinder(kg)
9. Frequency of use: hours worked per minute()
10. Cylinder fixation